Clicking on the image will allow you to enlarge for bigger view.
Supplies
1 tube of choice - I used the artwork of Amberly Berendson which can be purchased from My Tubed Art. You must obtain a license to use.
Font of Choice - I used Lunabar here
Becky Mask 9 here
“Emolicious” is a PTU scrap kit created by Tammy’s Scraps and can be purchased from Stargazer Scraps. You can visit her blog here.
Thank you for such a fabulous kit Tammy!
This tutorial was written assuming you have a working knowledge of PSP.
~♥~ Let’s get started ~♥~
Open up a 700 x 700 blank canvas.
Flood fill white.
Copy and paste Paper 11 as a new layer.
Resize 25%
Use your Magic Wand and click anywhere outside of the paper.
Selections/Invert
Selections/Modify/Contract by 15
Tap the delete key.
Deselect.
Give it a slight Inner Bevel:
Duplicate/Free rotate Left 10 degrees.
Duplicate/Mirror
Move all 3 frames into position - see my tag for reference.
Highlight the center frame layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Deselect.
Highlight the top frame layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 9 Into Selection.
Copy and paste your tube as a new layer below the frame - position the top area of your tube within the frame.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Soft Light.
Highlight the bottom frame layer.
Repeat the above step accept position the lower half of your tube within the frame.
Paste your tube again.
Position in front of the middle frame.
Add your embellishments. I used:
Element 22: Resize 25% and 50%/Duplicate and put at each corner of the frames.
Element 35: Resize 40%/Use Pick Tool to rotate so you can’t see the bows once it’s placed behind the frames/Duplicate/Resize 90%
Element 43: Resize 65%
Element 19: Resize 25%/Duplicate/Mirror
Element 10: Duplicate/Mirror
Element 29
Element 11: Resize 25%
Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 5 Into Selection.
Deselect.
Adjust/Blur/Motion blur:
Angle: 225
Strength: 97
OK
Apply Brush Strokes - Sprayed Strokes:
Stroke length: 12
Spray radius: 11
Stroke Direction: Right Diag
OK
Apply the mask.
Merge Group.
Add your copyrights.
Add your name.
Give it the same Inner Bevel.
Resize all layers 85%.
I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev
Supplies
1 tube of choice - I used the artwork of Amberly Berendson which can be purchased from My Tubed Art. You must obtain a license to use.
Font of Choice - I used Lunabar here
Becky Mask 9 here
“Emolicious” is a PTU scrap kit created by Tammy’s Scraps and can be purchased from Stargazer Scraps. You can visit her blog here.
Thank you for such a fabulous kit Tammy!
This tutorial was written assuming you have a working knowledge of PSP.
~♥~ Let’s get started ~♥~
Open up a 700 x 700 blank canvas.
Flood fill white.
Copy and paste Paper 11 as a new layer.
Resize 25%
Use your Magic Wand and click anywhere outside of the paper.
Selections/Invert
Selections/Modify/Contract by 15
Tap the delete key.
Deselect.
Give it a slight Inner Bevel:
Duplicate/Free rotate Left 10 degrees.
Duplicate/Mirror
Move all 3 frames into position - see my tag for reference.
Highlight the center frame layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 10 Into Selection.
Deselect.
Highlight the top frame layer.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste Paper 9 Into Selection.
Copy and paste your tube as a new layer below the frame - position the top area of your tube within the frame.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Soft Light.
Highlight the bottom frame layer.
Repeat the above step accept position the lower half of your tube within the frame.
Paste your tube again.
Position in front of the middle frame.
Add your embellishments. I used:
Element 22: Resize 25% and 50%/Duplicate and put at each corner of the frames.
Element 35: Resize 40%/Use Pick Tool to rotate so you can’t see the bows once it’s placed behind the frames/Duplicate/Resize 90%
Element 43: Resize 65%
Element 19: Resize 25%/Duplicate/Mirror
Element 10: Duplicate/Mirror
Element 29
Element 11: Resize 25%
Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 5 Into Selection.
Deselect.
Adjust/Blur/Motion blur:
Angle: 225
Strength: 97
OK
Apply Brush Strokes - Sprayed Strokes:
Stroke length: 12
Spray radius: 11
Stroke Direction: Right Diag
OK
Apply the mask.
Merge Group.
Add your copyrights.
Add your name.
Give it the same Inner Bevel.
Resize all layers 85%.
I hope you enjoyed this tutorial.
I’d love to see your results and show it off in my gallery.
Email me!
Hugs,
Bev
No comments:
Post a Comment