Saturday, January 26, 2019

All For Love



Supplies Needed

1 tube of choice – I used the fantastic artwork of Amberly Berendson and can be purchased from DigitalArt Heaven

Font of choice – I used Afternoon in Stereo here

Vix Mask 451 here

My template 227 here

Plug Ins used:
Brush strokes – Cross Hatch
Xero - Mistifier

  “All for Love” is a tagger size scrap kit created by Julie of Bits ‘n Bobs and can be purchased from here.  You can visit her blog here.  Thank you Julie for another beautiful kit!!
    
This tutorial was written assuming you have a working knowledge of PSP. 

~~ Let’s get started ~~

Open up the template.
Shift + D
Close out the original.
Delete the credit layer.
Highlight the background layer.
Image/Canvas Size:
700 x 700
OK
Flood fill white.

Highlight Temp Layer 1.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 15 Into Selection.
Deselect.
Delete the template layer.

Highlight Temp Layer 2.
Repeat the above step.

Highlight Temp Layer 4.
Merge down.
Temp Layer 3 and Temp Layer 4 should now be on the same layer.
Select All/Float/Defloat
New Raster layer.
Paste Paper 15 Into Selection.
Deselect.
Delete the template layer.

Highlight Temp Layer 5.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 14 Into Selection.
Deselect.
Apply Brush Strokes – Crosshatch:
Stroke Length: 9
Sharpness: 6
Strength: 1
OK

Highlight Temp Layer 7.
Repeat the above step.

Highlight Temp Layer 6.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8 Into Selection.
Click the lock icon at the top of your layers pallet to lock the layer.
Apply Xer0 – Mistifier 2x’s:
Use Default Settings
Click the lock icon at the top of your layers pallet to Unlock the layer.
Deselect.
Delete the template layer.

Highlight Temp Layer 8.
Click on it with your Magic Wand.
Copy and paste Paper 3 as a new layer.
Resize 60%
Move into position over the template.
Right click on the paper in your layers pallet and choose “Promote Section to Layer”.
Delete the original paper layer.
Copy and paste your tube as a new layer over the promoted layer.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.

Copy and paste element 41 as a new layer.
Resize 40%
Duplicate and resize 70% and duplicate.
Move all 3 elements into position over Temp Layers 9, 10, and 11.

Copy and paste element 73 as a new layer.
Resize 20%
Duplicate 3 more times.
Move all 4 elements into position over Temp Layers 12 and 13.

Copy and paste your tube as a new layer – see my tag for reference.

Add your elements.  I used:
El 48:  Resize 45%
El 4:  Use Pick Tool to Flatten
El 13:  Resize 70%
El 27:  Free rotate Left 6 degrees/Resize 55%
El 66: Resize 85%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 12 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Duplicate 2 more times for a total of 3 mask layers.
2 of them resize 70% and move into position behind each of the round frames – see my tag for reference.
The last mask, resize 90% and keep that centered

Add your copyrights.

Add your name.
Color Pallet:
Foreground: #d4d4d4
Background: #4c0000
Stroke width: 1
Type your name.
Convert to Raster layer.
Give it a slight Inner Bevel:

I hope you enjoyed this tutorial.   
I’d love to see your results.
Email me!
Hugs,
Bev

Crazy Adorable




Supplies Needed

1 tube of choice – I used the adorable artwork of Maryline Cazenave and can be purchased from CDO

Font of choice – I used Sattay here

Weescotlass Mask 249 here

My template 229 here

Plug Ins used:
Xero - Fritillary

  Forever and Ever” is a tagger size scrap kit created by Julie of Bits ‘n Bobs and can be purchased from here.  You can visit her blog here.  Thank you Julie for such an adorable kit!!
    
This tutorial was written assuming you have a working knowledge of PSP. 

~~ Let’s get started ~~

Open up the template.
Shift + D
Close out the original.
Delete the credit layer.
Highlight the background layer.
Image/Canvas Size:
700 x 700
OK
Flood fill white.

Highlight Temp Layer 1.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 14 Into Selection.
Deselect.
Apply a slight Inner Bevel:

Delete the template layer.

Highlight Temp Layer 2.
Repeat the above step.

Highlight Temp Layer 3.
Flood fill with #ebe4d4 (just place your flood fill tool right over the template and click the mouse)
Apply Xero – Fritillary:
Use Default Settings.

Highlight Temp Layer 4.
Click on it with your Magic Wand.
Copy and paste Paper 15 as a new layer.
Resize 50%
Move into position over the template layer (the paper is shorter than the template.  It’s ok, you can’t see that part)
Right click on the paper in your layers pallet and choose “Promote Section to Layer.”
Deselect.
Delete the template layer.
Give the paper the same slight Inner Bevel.

Repeat the above step with Temp Layer 5.

Copy and paste E70 as a new layer.
Resize 50%
Free rotate Left 90 degrees
Duplicate
Move both elements into position behind the Promoted Papers you just worked on.

Highlight Temp Layer 6.
Flood fill this template with #da8189.
Apply Xero – Fritillary – use Same settings.
Give it the same slight Inner Bevel.

Highlight Temp Layer 8.
Merge Down to Temp Layer 7.
Both templates should now be on the same layer.
Select All/Float/Defloat
New Raster layer.
Copy and paste Paper 15 Into Selection.
Deselect.
Delete the template layer.

Highlight Temp Layer 9.
Click on it with your Magic Wand.
Paste Paper 15 Into Selection.
Deselect.
Delete the template layer.
Give the paper the same slight Inner Bevel.

Highlight Temp Layer 11.
Repeat the above step.

Highlight Temp Layer 10.
Click on it with your Magic Wand.
Copy and paste Paper 4 as a new layer.
Resize 35%
Move into position over the template layer.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.
Give it a slight Inner bevel:

Highlight Temp Layer 12.
Repeat the above step.

Highlight Temp Layer 13.
Flood Fill with #7eb9b7
Adjust/Add Remove Noise/Add Noise:
Uniform and Monochrome checked
Noise: 3%
OK 
Give it a slight Inner Bevel:


Highlight Temp Layer 15.
Repeat the above step.

Highlight Temp Layer 14.
Flood will with #f3d5d7
Adjust/Add Remove Noise/Add Noise:
Use Same Settings

Highlight Temp Layer 16.
Flood fill with #f3d5d7
Add the same noise effect.
Give it the same slight Inner Bevel.
Click anywhere outside of the heart with your Magic Wand.
Copy and paste your tube as a new layer over the heart.
Use your Eraser Tool and erase only the part of the tube you don’t want seen.
Deselect.

Copy and paste your tube as a new layer – see my tag for reference.

Add your elements.  I used:
85:  Resize 75%
15:  Resize 50%/Duplicate/Resize 70%
38:  Resize 60%
12:  Resize 50%/Duplicate
18 & 19:  Resize 45%
45 & 46:  Resize 30%
56;  Resize 45%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 9 Into Selection.
Deselect.
Adjust/Blur/Gaussian Blur:
Radius: 8%
OK
Apply the mask.
Resize 120%
OK
Merge Group.

Add your copyrights.

Add your name.
Color Pallet:
Foreground and Background: #2a2828
Stroke width: 1
Type your name.
Convert to Raster layer.
Give it a slight Inner Bevel:

I hope you enjoyed this tutorial.   
I’d love to see your results.
Email me!
Hugs,
Bev