Supplies Needed
1 tube of choice – I'm using the artwork of Barbara Jensen
which you can purchase here
1 tube of choice – I'm using the artwork of Barbara Jensen
which you can purchase here
Eyecandy 4000/Glass (Optional)
Eyecandy 5/Impact (Optional)
"Mint Chocca Latte" PTU tagger kit by Twinky’s Designs which can be found here.
Thank you so much for another fabulous kit, Twinky!!
This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~
Don’t forget to drop shadow all your elements and tubes.
Open a 600 X 600 transparent canvas. Flood fill white.
Copy and paste Frame 2 as a new layer. Resize 80%. Use your magic wand and click inside the frame. Expand by 4.
Copy and paste a paper of choice as a new layer. Selections/Invert. Hit the delete key.
Copy and paste your tube. Close out your white canvas and merge visible. Free rotate left 5 degrees.
Copy and paste Template 1 below the frame. Free rotate right 10 degrees.
Copy and paste Template 2 as a new layer.
Copy and paste Template 3 as a new layer. Resize 80%.
Copy and paste Flower 7 as a new layer. Resize 30%. Position behind the upper right corner of the frame. See my tag for reference.
Copy and paste Flower 5 as a new layer. Resize 30% and 90%. Position in front of the upper right corner of the frame.
Copy and paste Flower 4 as a new layer. Resize 30%, 90%, and 90%. Position in front of the top right corner of the frame.
Copy and paste Heart 2 as a new layer. Resize 25% and position near the bottom right corner of your frame.
Copy and paste Bow 9 as a new layer. Resize 40%. Image/Flip. Position at the left side of the frame.
Copy and paste Tag 1 as a new layer. Resize 30%. Free rotate left 35 degrees. Position near the bottom left corner of your frame. See my tag for reference.
Copy and paste Button 7 as a new layer. Resize 20%. Position below the frame. Repeat for Buttons 5 and 2.
Copy and paste Button 6 as a new layer. Resize 50%. Position behind the left side of the frame. Repeat with button 5 but position it behind the right side of the frame.
Highlight your white canvas. New Raster Layer. Select All. Copy and paste a paper of choice Into Selection. Deselect. Apply your mask. Merge Group.
Add your copyrights.
Add your name.
I used Stroke: Null Background: 00000
You can add the glass as follows:
Eyecandy 4000/Glass
On the Basic tab:
Bevel Width: 30
Smoothness: 75
Inside Marquee
Edge Darkening:30
Gradient Shading: 35
Refraction: 50
Opacity: 0
Tinting: 50
Glass color: 00c800
Lighting Tab:
Direction: 135
Inclination: 45
Highlight Brightness: 100
Highlight size: 40
Ripple Thickness: 0
Ripple Width: 200.00
Bevel Profile Tab:
Button
Apply a Glow:
Eyecandy 5/Impact/Gradient Glow
On the Basic tab:
Outside Glow
Mask Selection checked
Glow radius: 5
Soft corners: 0
Overall Opacity: 100
Distortion Amount: 0
Distortion Lump size: 100
Smoothness: 46
Color: 92bfc0
Add your own drop shadow.
I hope you enjoyed this tutorial.
I would love to see your results and put into my gallery.
Email me!
Hugs,
Bev
Eyecandy 5/Impact (Optional)
"Mint Chocca Latte" PTU tagger kit by Twinky’s Designs which can be found here.
Thank you so much for another fabulous kit, Twinky!!
This tutorial was written assuming you have working knowledge of PSP.
~♥~ Let’s get started ~♥~
Don’t forget to drop shadow all your elements and tubes.
Open a 600 X 600 transparent canvas. Flood fill white.
Copy and paste Frame 2 as a new layer. Resize 80%. Use your magic wand and click inside the frame. Expand by 4.
Copy and paste a paper of choice as a new layer. Selections/Invert. Hit the delete key.
Copy and paste your tube. Close out your white canvas and merge visible. Free rotate left 5 degrees.
Copy and paste Template 1 below the frame. Free rotate right 10 degrees.
Copy and paste Template 2 as a new layer.
Copy and paste Template 3 as a new layer. Resize 80%.
Copy and paste Flower 7 as a new layer. Resize 30%. Position behind the upper right corner of the frame. See my tag for reference.
Copy and paste Flower 5 as a new layer. Resize 30% and 90%. Position in front of the upper right corner of the frame.
Copy and paste Flower 4 as a new layer. Resize 30%, 90%, and 90%. Position in front of the top right corner of the frame.
Copy and paste Heart 2 as a new layer. Resize 25% and position near the bottom right corner of your frame.
Copy and paste Bow 9 as a new layer. Resize 40%. Image/Flip. Position at the left side of the frame.
Copy and paste Tag 1 as a new layer. Resize 30%. Free rotate left 35 degrees. Position near the bottom left corner of your frame. See my tag for reference.
Copy and paste Button 7 as a new layer. Resize 20%. Position below the frame. Repeat for Buttons 5 and 2.
Copy and paste Button 6 as a new layer. Resize 50%. Position behind the left side of the frame. Repeat with button 5 but position it behind the right side of the frame.
Highlight your white canvas. New Raster Layer. Select All. Copy and paste a paper of choice Into Selection. Deselect. Apply your mask. Merge Group.
Add your copyrights.
Add your name.
I used Stroke: Null Background: 00000
You can add the glass as follows:
Eyecandy 4000/Glass
On the Basic tab:
Bevel Width: 30
Smoothness: 75
Inside Marquee
Edge Darkening:30
Gradient Shading: 35
Refraction: 50
Opacity: 0
Tinting: 50
Glass color: 00c800
Lighting Tab:
Direction: 135
Inclination: 45
Highlight Brightness: 100
Highlight size: 40
Ripple Thickness: 0
Ripple Width: 200.00
Bevel Profile Tab:
Button
Apply a Glow:
Eyecandy 5/Impact/Gradient Glow
On the Basic tab:
Outside Glow
Mask Selection checked
Glow radius: 5
Soft corners: 0
Overall Opacity: 100
Distortion Amount: 0
Distortion Lump size: 100
Smoothness: 46
Color: 92bfc0
Add your own drop shadow.
I hope you enjoyed this tutorial.
I would love to see your results and put into my gallery.
Email me!
Hugs,
Bev
No comments:
Post a Comment