Sunday, August 6, 2017

A Summer Story




Supplies Needed

Font of choice – I used Midnight Valentine here

JWY mask here

Plug Ins used:
Brush Strokes - Crosshatch

“A Summer Story” is a PTU scrap kit created by Tootypup Scraps and can be purchased from any of her stores here.  Thank you, Susan, for an absolutely stunning kit!!   
  
This tutorial was written assuming you have a working knowledge of PSP. 

~♥~ Let’s get started ~♥~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Daisy Frame 01 as a new layer.
Resize 40%
Make your Selection Tool active, set on either Freehand Selection or Point to Point (whichever is easier for you to se) and section off the right side of the frame.  See my example:

Duplicate the frame layer.
Mirror
Match both frame ends together to create one rectangular frame.


Merge Visible both frame layers.
Center this frame on your canvas.
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 2.
Copy and paste Paper 03a as a new layer below the frame layer.
Resize the paper 60% and move into a position you like.
Right click on the paper in your layers pallet.
Choose “Promote Section to Layer” from the submenu.
Delete the original paper layer.
Select/Invert
Do not Deselect.

Copy and paste the following elements below the frame layer – see my tag for reference as to where to place them (don’t worry about what overhangs, we’ll clean that up in a bit):
A Summer Story 01:  Resize 70%
Sunburst 01:  Resize 40%

Highlight each element that’s below the frame and tap the delete key.
Deselect.

Close out your white background.
Merge visible.
Reopen your white background.

Copy and paste Frame 03 as a new layer.
Resize 30%
Move this behind the merged layer.
Duplicate
Tap the letter K on your keyboard to activate your Pick Tool and move each of the frames into position (see my tag for reference) turn each of the frames so the cluster of elements are hidden.
Be sure each of these frames are in exact position -
To each frame:
Click inside the frame with your Magic Wand.
Selections/Modify/Expand by 2.
New Raster layer below the frame.
Copy and paste Paper 6 Into Section.
New Raster layer above Paper 6.
Copy and paste Paper 2 Into Section.
Change the Opacity of this paper to Multiply.
Deselect.

Copy and paste Paper 10 as a new layer behind the merged layer.
Resize 30%
Apply Brush Strokes – Crosshatch
Match your settings to mine:

 Make your Selection Tool active, set on Square.
Section out the entire paper except for the black edges.
Selections/Invert
Tap the delete key.
Deselect.
Apply a slight Inner Bevel:

Move this paper into exact position – see my tag for reference.

Add your elements.  I used:
Summer Tag 01: Duplicate/Flip/Duplicate
Daisy Spring 01:  Resize 40%
Daisy Rope 01a:  Resize 45%
Butterfly Cluster 01:  Resize 50%
Bow 01:  Resize 40%
Wildgrass 02a:  Resize 60%
Seabird 01a:  Resize 55%/Mirror
Seabird 01a (again):  Resize 25%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 8 Into Selection.
Deselect.
Apply the mask.
Free Rotate Left 90 degrees
Tap the letter “K” on your keyboard to activate your Pick Tool and pull down the top and bottom lines until you can no longer see the oval design of the mask – see my tag for reference.
Merge Group.

Tap the Letter M on your keyboard to deactivate your Pick Tool.

Crop your image but leave ample space at the top and bottom of your tag.

Add your copyrights.

Add your name.
Color Pallet:
Foreground: #506d06 
Background: #cee3a8 

Make your Text Tool active.
Set the stroke to 1.0
Type your name.
Give it a slight Inner Bevel:


Make your Freehand Selection Tool active and section off the bottom 1/3 of your name.
Selections/Modify/Feather:
Number of Pixels: 30
OK
Shift + B – the Brightness/Contrast box should open.
Brightness: -48
Contrast: 11
OK
Deselect.

Color Pallet:
Foreground: #afdfea
Make your Target Tool active
Set the size to 116 and Hardness to 29.
Barely brush the tool along the bottom of your name to give it a hint of blue color.

Close out your white background.
Save your tag as a PNG.

I hope you enjoyed this tutorial.   
I’d love to see your results.
Email me!
Hugs,
Bev


Monday, July 24, 2017

Fairy Solace



Supplies Needed

1 tube of choice – I used the artwork of Karen Middleton which can be purchased from CDO.

Font of choice – I used Papyrus (came with my program)

Millie’s PSP Madness Template 811 here

Vix mask 451 here

Plug Ins used:
Mura’s Meister – Copies
Xero - Porcelain

“Miss Spring” is a PTU scrap kit created by TootyPup Scraps and can be purchased from any of her stores here.  Thank you Susan for such a beautiful kit!!  Gorgeous work as always.
  
This tutorial was written assuming you have a working knowledge of PSP. 

~♥~ Let’s get started ~♥~

Open the template.
Shift + D to duplicate.
Close out the original.
Highlight and open the background layer.
Image/Canvas Size:
700 x 700
OK
Flood fill white.
Delete the top 2 layers.

Highlight 1.
Click on it with your Magic Wand.
New Raster layer.
Copy and Paste Background Paper 04 Into Selection.
Deselect.
Delete the template layer.
Give the paper a slight Inner Bevel:

Highlight 2.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Background Paper 011 Into Selection.
Resize 65%
Move the paper so the far right side of the paper covers the template.
In your layers pallet right click on the paper.
Choose “Promote Section to Layer”
Duplicate/Flip
Deselect.
Delete the original paper layer.
Make your Selection Tool active, set on Rectangle.
Section off the top half of the paper you flipped.
Tap the delete key.
Deselect.
Merge Visible both paper layers.
Delete the template layer.
Give the paper the same slight Inner Bevel.

Highlight 3.
Click on it with your Magic Wand.
Copy and paste Background Paper 01 as a new layer.
Resize 70%
Move into a position you like over the template layer.
Right click on the paper layer in your layers pallet.
Choose “Promote Section to Layer”
Delete the Original paper layer.
Deselect for now.

Add the elements to the circle - copy and paste the following (see my tag for reference, and don’t worry about what overhangs, we’ll clean that up in a bit)
Old Log Rail Fence 02:  Resize 70% - position so there’s a gap in between the bottom of the element and the bottom area of the circle.
Ground 01:  Position so the gap under the fence is covered and you can no longer see the circle
Tree 01a:  Resize 40%/Duplicate/Resize 60%

Highlight the circle template layer.
Click anywhere outside of it with your Magic Wand.
Highlight each element and tap the delete key.
Deselect.
Delete the template layer.

Copy and paste Daisy Bloom 01a as a new layer.
Resize 30%
Apply Mura’s Mesiter – Copies:
Change your settings to match mine:

Highlight 4.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Background Paper 04 Into Selection.
Adjust/Add Remove Noise/Add Noise:
Gaussian checked
Noise: 35%
OK
Deselect.
Delete the template layer.

Highlight 5.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Background Paper 02 Into Selection.
Deselect.
Delete the template layer.

Highlight 6.
Click on it with your Magic Wand.
Copy and paste Background Paper 01 as a new layer.
Resize the paper 50% and move into a position over the template that you like.
Right click on the paper in your layers pallet.
Choose “Promote Section to Layer”.
Delete the original paper layer.
Deselect for now.
We’ll come back to this in a bit.

Copy and paste Old Tree Stump 01b as a new layer.
Resize 55%
Copy and paste your tube as a new layer.
Resize as you like.

Make your Selection Tool active set on Square.
Section out the area on your canvas that captures your tube:

Copy Merge.
Deselect.
Edit/Paste as new layer (over the small square cloud paper).
Resize the image 130%
Highlight the cloud paper.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
Tap the delete key.
Ctrl + H (to open the Feather Selection box)
Number of Pixels: 30
OK
Tap the delete key 5 times.
Deselect.
Apply Xero – Porcelain 2 times using default settings.

Copy and paste Ribbon 01 as a new layer.
Resize 20%
Move into position over the image layer – see my tag for reference.
Highlight the bottom square layer in your layers pallet.
Click anywhere outside of it with your Magic Wand.
Highlight the Ribbon layer.
Use your Eraser Tool and erase the sides that overhang the frame.
Deselect.
Make your Lighten/Darken Tool active and just touch the sides of the ribbon near the edge to darken it up just a little to give it that “wrapped” appearance.

Add your elements.  I used:
Sign 00:  Resize 45%
Wild Grass 01a:  Resize 45%/Duplicate as many times as you like
Shroom 04a:  Resize 15% & 70%
Ground 01:  Resize 50%
Flower Deco 03a:  Resize 65%
Dragonfly 01:  Resize 40%/Duplicate/Mirror

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Background Paper 11 Into Selection.
Deselect.
Apply the mask.
Resize 110%
Merge Group.
Duplicate and lower the Opacity to about 53.

Add your copyrights.

Add your name.
Color Pallet:
Foreground and Background: #faf5e0

Make your Text Tool active and type your name.
Use the box around the name to turn and fit on the wood sign element.
Right click on it in your layers pallet and choose “Convert to Raster layer”.

Close out your white background.
Save your tag as a PNG.

I hope you enjoyed this tutorial.   
I’d love to see your results.
Email me!
Hugs,
Bev