Friday, July 13, 2012

Only For You


Supplies

1 tube of choice – I used the beautiful artwork of Paul Butvila which can be purchased from Up Your Art.  You must have a license to use.

Font of choice - I used Centeria Script here

Vix Mask 451 here

My template 142 here

My Supplies here
Elements & Papers

Plug Ins used:
DSB Flux – Bright Noise

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Delete the credit layer.

Highlight Rec 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:

Highlight Rec 2 layer.
Repeat the above step.

Color Pallet:
Foreground: #808080
Background: #861816

Highlight Rec 1 Dotted Corner layer.
Make your Color Replacer Tool active.
Hold it over the dotted line and double right click your mouse.
The line should now be red.

Highlight Rec 2 Dotted Corner layer.
Repeat the above step.

Open up the tube.
Highlight the very bottom layer- “Image PB0018 Day Dreamer”
Make your Selection Tool active set on Rectangle and section off the top area of the image:

Copy.

Make your working canvas active.
Highlight Oval layer.
Click on it with your Magic Wand.
New Raster layer.
Paste Into Selection.
Deselect.

Copy and paste your tube as a new layer.
Move into position – see my tag for reference.
You want to place the tube so that it’s covering most of the disfigured bird.
Using your Selection Tool, section off an area of the left side of the oval:

Copy.
Deselect.
Paste as new layer.
Mirror.
Move this so that it matches exactly over the right side of the oval.
Pretty clever, huh? Lol

Highlight Strip layer.
Click anywhere outside of it with your Magic Wand.
Copy and paste your tube as a new layer over the strip.
Tap the delete key.
Deselect.

Color Pallet:
Change the foreground to #404040
Keep the background red.

Make your Color Replacer Tool active.
Highlight Stars layer and double right click over the stars.
They should now be red.
Give them a slight Inner Bevel:

Apply DSB Flux – Bright Noise:
Intensity: 55
Mix checked
OK


Add your elements.  I used:
EL4: Duplicate
EL 3: Duplicate 3x’s
EL 2:  Free rotate Right 10 degrees/Duplicate/Mirror/Flip
EL 5
EL 1

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Apply the mask.
Resize 110%
Use your Pick Tool to pull the sides out a little.
Merge Group.

Add your credits.

Add your name.
Foreground and Background: #861816
Stroke: 05
Type your name.
Apply a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev

Summer Nights



Supplies

1 tube of choice – I used the artwork of Elias Chatzoudis which can be purchased from PSP Tubes Emporium.  You must have a license to use.

Font of choice – I used Allura here

Gem Mask 136 here

Plugs Ins used:
Greg’s Factory Output Vol. II – Pool Shadow
Eyecandy 3.1 - Glow


"Summer Nights" is tagger size scrap kit created by Leanne of Bella's Designs and can be purchased from Confetti Scraps Boutique.  You can visit her blog here.
Thank you Leanne for a really terrific summer kit!

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Element 30 as a new layer.
Resize 90%
Free rotate Right 75 degrees
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Flood fill with #202020
Apply Greg’s Factory Output Vol. II – Pool Shadow:
Use Default settings.
OK
Copy and paste Element 27 as a new layer below the frame.
Resize 80%
Move into position – see my tag for reference.
Selections/Invert
Tap the delete key.
Deselect.

Copy and paste your tube as a new layer.

Add your elements.  I used:
Element 21:  Resize 70% - Move into position and then apply Pool Shadow effect – same settings.
Element 21 again:  Resize 40% - move into position and apply Pool Shadow effect – same settings.
Element 22:  Duplicate
Element 12:  Resize 25%/Duplicate/Resize 70%/Use Pick Tool to turn a little
Element 17:  Resize 50%/Free rotate Right 75 degrees/Mirror/Duplicate/Resize 70%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Deselect.
Adjust/Blur/Gaussian Blur:
Radius: 11
OK
Apply the mask.
Merge Group.

Add your credits.

Add your name.
Foreground and Background: #373951
Stroke: .5
Type your name.
Convert to Raster layer.
Apply Eyecandy 3.1 – Glow:
Width: 3
Opacity: 100
Opacity Drop Off: Fat
Color: White
OK

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev

Fine Feathered Friends


Supplies

1 tube of choice – I used the beautiful artwork of Christina Lank which can be purchased from PSP Tube Stop.  You must have a license to use.

Font of choice - I used Centeria Script here

Weescotlass Mask 220 here

My template 141 here

My Supplies here
2 elements and 3 papers.

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Image/Canvas Size:
700 x 600
OK
Highlight the background layer.
Flood fill white.
Delete the credit layer.

Highlight Rectangle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 2 Into Selection.
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:

Highlight Rectangle 2 layer.
Repeat the above step.

Highlight Circle 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Deselect.
Delete the template layer.

Highlight Strip 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight Inner Bevel.

Open Paper.
Mirror
Copy

Highlight Strip 2 layer.
Click on it with your Magic Wand.
New Raster layer.
Paste Paper 2 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight Inner Bevel.

Highlight Circle 2 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 3 Into Selection.
Copy and paste your tube as a new layer over the paper layer.
Selections/Invert
Use your Eraser Tool and erase only the parts of the tube you don’t want to overhang the circle paper .
Deselect.
Delete the template layer.

Color Pallet:
Foreground: #ffc0ff
Background: #006ba5

Highlight Dotted Circle layer.
Make your Color Replacer Tool active.
Hold it over the Dotted Circle layer and double right click.
It should have turned to the blue color.

Repeat the above step with Dotted Line 1 and Dotted Line 2 layers.

                                                     Add your elements.  I used:
I used 2 of the birds that came with the tube:
BlueBird 3:  Resize 50%
BlueBird 1:  Resize 40%
EL 1:  Duplicate 2 x’s, mirror one of them.
EL 2

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 1 Into Selection.
Apply the mask.
Merge Group.
Duplicate
Merge Down.
Duplicate
Flip

Add your credits.

Add your name.
Foreground and Background: #404040
Stroke: 1
Type your name.
Apply a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev

Thursday, July 12, 2012

Poseidon's Adventure 2012


Supplies

Font of choice - I used Dragonfly here

Monti Circular Mask here

“Poseidon’s Adventure 2012 ” is a tagger size scrap kit created by Dianna of Digicats (& Dogs) and can be purchased from her store CountryCorner Creations.   You can visit her blog here.
Thank you for a truly AMAZING kit Dianna!

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up a 700 x 700 blank canvas.
Flood fill white.

Copy and paste Frame 10 as a new layer.
Resize 60%
Duplicate
Position both frames on your canvas – see my tag for reference.

To each frame:
Click inside of it with your Magic Wand.
Selection/Modify/Expand by 35
New Raster layer below the frame.
Copy and paste Paper 12 Into Selection.
Deselect.

Add your elements below each of the frames.  Don’t worry about what overhangs the frames.  We’ll clean that up in a bit.  I used:
Top Frame:
Castle 1:  Resize 40%
Sea Turtle:  Resize 30%
Reef:  Resize 30%/Duplicate (position beneath the bottom frame)
Scalar Fish 1:  Resize 30%/Duplicate
Seaweed 04:  Resize 40%/Duplicate 2x’s (position beneath the bottom frame)

Bottom Frame:
Fishies:  Resize 30%
Angel Fish:  Resize 30%/Duplicate 2x’s
Seaweed 03:  Resize 15%/Duplicate 2x’s

To clean the mess up of any elements that are sticking out from behind the frames-
To each frame:
Highlight the paper layer.
Click anywhere outside of it with your Magic Wand.
Highlight each element that overhangs the frame.
Tap the delete key.
Deselect.

Add the rest of your elements.  I used:
Boat:  Resize 70%/Mirror
Castle 2:  Resize 80%
Seaweed 06
Seaweed 07:  Resize 30%
Starfish 02:  Resize 25%
Starfish:  Resize 25%/Free rotate Right 40 degrees
Bubbles:  Resize 50%

Highlight your white background layer.
Copy and paste Sand as a new layer.
Resize 90%
Move it to the bottom of your canvas so the bottom of the element is flush with the bottom of your canvas.
Apply the mask.
Merge Group.
Duplicate

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 16 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Use your Eraser Tool, lower the Hardness to about 40, and erase the area that you can see below the sand – taking care to blend it neatly where background paper mask layer and sand mask layer meet.

Add your credits.

Add your name.
Foreground & Background: #404040
Stroke: 1
Type your name.
Apply a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev

Wednesday, July 11, 2012

Color of Love


Supplies

1 tube of choice – I used the artwork of Ted Hammond which can be purchased from CDO.  You must have a license to use.

Font of choice - I used Centeria Script here

Vix Big Mask 1 here

My template 150 here

Plug Ins used:
DSB Flux – Bright Noise
Mura’s Meister - Copies

“Color of Love” is a tagger size scrap kit, also available in full size, created by Kesha of KnC Scrapz and can be purchased from her store Lollipops n Gumdrops.   You can visit her blog here.
Thank you Kesha for another really beautiful kit.

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Image/Canvas Size:
700 x 600
OK
Highlight the background layer.
Flood fill white.
Delete the credit layer.

Highlight Square 1 layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8  Into Selection.
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:

Highlight Square 2 layer.
Repeat the above step.

Highlight Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 1 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight Inner Bevel.

Highlight Glitter Circle layer.
Click anywhere outside of it with your Magic Wand.
Selections/Invert
New Raster layer.
Copy and paste Paper 4 Into Selection.
Deselect.
Delete the template layer.
Apply DSB Flux – Bright Noise:
Intensity: 43
Mix checked
OK

Highlight Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 5 Into Selection.
Copy and paste your tube as a new layer over the circle paper.
Selections/Invert
Tap the delete key.
Deselect.
Change the Properties to Overlay.
Lower the Opacity to about 40.

Copy and paste your tube as a new layer.
Position in front of the circle.

Copy and paste Stick as a new layer.
Resize 15%
Free rotate Right 90 degrees
Position over one of the lines of the Lines template layer.
Duplicate the stick 2x’s.
Move into position over the other two lines of the template.
Delete the template.

Copy and paste Button 3 as a new layer.
Resize 15%
Apply Mura’s Meister – Copies:
Choose Line from the dropdown menu
Change the top Number to 20.
OK
You will now have a line of dots.
Free rotate Right 90%
Move into position – see my tag for reference.
Erase all dots that overhang the rectangle.

                                                     Add your elements.  I used:
Element 7:  Resize 20%/Duplicate/Flip
Chair:  Resize 40%/Mirror
Fan:  Resize 30%/Flip/Duplicate
Element 3:  Resize 15%/Free rotate Right 20 degrees/Duplicate/Mirror/Resize 70%
Hearts:  Resize 25%/Duplicate/Mirror
Wings:  Resize 70%
Feathers:  Resize 40%

Highlight your white background.
New Raster layer.
Select All.
Copy and paste Paper 2Into Selection.
Apply the mask.
Merge Group.

Add your credits.

Add your name.
Foreground: #000000
Background: #920306
Stroke: 1
Type your name.
Apply a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev

Monday, July 9, 2012

By the Seashore


Supplies

1 tube of choice – I used the artwork of Jose Cano which can be purchased from PSP Tubes Emporium.  You must have a license to use.

Font of choice - I used Before the Rain here

Monti Circular Mask here

Plugs Ins used:
Mura’s Meister – Cloud

I used the following scripts and overlays which were created by Chris of Katelynn’s Designs to make all the elements in this tutorial:
Beach Overlays
Dock Script
Life Saver Frame Script
Water Lilly Script

Be sure to stop by Chris’ blog to check out more of her awesome work and find links to her stores for purchase.

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

This is the color pallet I chose to use:

Run all scripts to create the elements.  Create 2 starfish, each a different color.
If you don’t know how to run a script go here for a written tutorial.  It’s quite easy and running a script is always so amazing to sit back and watch!

Use the Beach Water 7 Overlay on an 800 x 800 canvas using the blue color from my color pallet.

Once you have all scripts run and saved as PNG’s flood fill a 700 x 700 blank canvas with #ffffff. 

Copy and paste Life Saver as a new layer.
Resize 25% and 80%
Click inside of it with your Magic Wand.
Selections/Modify/Expand by 4.
New Raster layer below the frame.
Copy and paste the Overlay Into Selection.
Deselect.

Arrange the rest of the elements using my tag as reference.
Dock:  Resize 25% and 60% (erase what overhangs the lifesaver)
Lilly Pad:  Resize 10%/Duplicate/Mirror
Starfish: Resize 10% and 60%/Duplicate/Mirror
The other starfish:  Resize 10% and 30%/Mirror

Copy and paste your tube as a new layer.

To make the paper for the background:

New Raster layer above the white background.

Color Pallet:
Foreground:  #ca8e5c
Background:  #f7d3b1

Make your Freehand Selection Tool active set on Freehand. 
Section off your canvas but make the top of the line squiggly a bit, not blunt and straight.

Apply Mura’s Meister – Cloud:
Default settings
Selections/Modify/Inside Outside Feather:
Both checked
Feather amount: 30
OK
Selections/Invert
Tap the delete key about 4 times.
Deselect.
This will be your sand layer.

Color Pallet:
Foreground:  #b6cdd3 
Background: #d8e6ef

Highlight your white background.
New Raster layer.
Apply Mura’s Meister – Cloud:
Click the reset button.
OK
This will be your sky layer.

Merge Visible the sky and sand layers.
Apply the mask.
Merge Group.
Duplicaste

Add your credits.

Add your name.
Foreground: #815536
Background: #bf490f
Stroke: 1
Type your name.
Give it a slight Inner Bevel:

Resize all layers 80%.

I’d love to see your results.
Email me!
Hugs,
Bev