Saturday, March 3, 2012

Spring Time Steampunk Style

Supplies

1 tube of choice and 1 close up image – I used the beautiful artwork of DiMary which is an exclusive tube from Pics for Design.  You must have a license to use.
Thank you so much Tammy for this tube.  You’re a generous sweetie!

Font of choice - I used Before the Rain here

Weescotlass Mask 236 here

Toxic Desirez Template 121 here

“Steampunk Spring Time” is full size scrap kit created by Heppy of H.F. Projekte and can be purchased from his store Inspirations of Scrap Friends.  You can visit his blog here.
Thank you Heppy for another classy and very elegant kit!

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Delete the top 3 layers.
Image/Canvas Size:
700 x 600
OK

Highlight Pink Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 9 Into Selection.
Deselect.
Delete the template layer.
Give it a slight Inner Bevel:

Repeat the above step with Thin Black Rectangle layer.

Highlight Black Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 3 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight Inner Bevel.

In your layers pallet:
Foreground: #fd64af
Background: #6894a4

Highlight Dotted line layer.
Make your Color Replacer Tool active.
Double Right click the mouse over the dotted line layer.

Highlight Black Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 10 Into Selection.
Deselect.
Delete the template layer.
Give it the same slight Inner Bevel.

Highlight Pink Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 7 Into Selection.
Copy and paste your close up image as a new layer.
Selections/Invert
Tap the delete key.
Change the Properties to Soft Light.
Deselect.
Delete the template layer.
Give the paper the same slight Inner Bevel.

Add your elements.  I used:
SST6:  Resize 35%/Mirror/Flip
SST3:  Resize 40%
SST 21:  Resize 10%
SST 17:  Resize 10% and 85%
SST 22:  Resize 10% and 85%
SST 24:  Resize 10%
SST 16:  Resize 25% and 75%
SST 8:  Resize 20%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 6 Into Selection.
Deselect.
Apply the mask.
Resize 110%
Merge Group.

Add your credits.

Add your name.
Foreground: #70531d
Background: #6894a4
Stroke: 1
Give it a slight Inner Bevel:

Resize all layers 80%

I’d love to see your results.
Email me!
Hugs,
Bev

Paddy's Luck

Supplies

1 tube of choice – I used the beautiful artwork of Joanna Bromley which can be purchased from PSP Tube Stop.  You must have a license to use.

Font of choice - I used Stonehenge here

Monti Circular mask here

My template 132 here

“Irish Maiden” is tagger size scrap kit created by Jen of Sleek n Sassy Designz and can be purchased from Lollipops n Gumdrops.  You can visit her blog here.
Thank you Jen for a super St. Paddy’s kit!

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Delete the top 2 layers.

Highlight Rectangle 1 layer.
Click anywhere outside of it with your Magic Wand.
Copy and paste Paper 7 as a new layer.
Tap the delete key.
Deselect.
Delete the template layer.

Highlight Rectangle 2 layer.
Click anywhere outside of it with your Magic Wand.
Copy and paste Paper 8 as a new layer.
Tap the delete key.
Deselect.
Delete the template layer.

In your layers pallet:
Foreground: #ffffff
Background: #ffffec

Make your Color Replacer Tool active.
Highlight Circle Back layer.
Double Right Click on the layer.
Adjust/Add Remove Noise/Add Noise:
Gaussian and Monochrome checked
Noise: 40%
OK

Highlight Circle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 11 Into Selection.
Copy and paste your tube as a new layer in front of the circle – move into the position you want.
Paste your tube again accept paste it just over the circle paper layer.  Resize larger if you need to.
Change the Properties to Overlay and lower the Opacity to about 36.
Selections/Invert
Tap the delete key.
Deselect.
Delete the template layer.

Add your elements.  I used:
25:  Resize 80%
16:  Resize 30%/Free rotate Left 10 degrees
19:  Resize 35%
22:  Resize 65%
12:  Resize 50%

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 4 Into Selection.
Deselect.
Apply the mask.
Merge Group.

Add your credits.

Add your name.
Foreground: #4c3d1d
Background: #e66456
Stroke: 1
Give it a slight Inner Bevel:

Resize all layers 80%

I’d love to see your results.
Email me!
Hugs,
Bev

Your World

 
Supplies

1 tube of choice and 1 image – I used the beautiful artwork of Natacha Chohra which can be purchased from PSP Tube Stop.  You must have a license to use.

Font of choice - I used Majestick here

Monti Circular mask here

Toxic Desirez template 134 here

Animation Shop

Sqirlz Water Reflections

“Stargazing” is tagger size scrap kit created by Nette of Nette’s NightOwl Works and can be purchased from Butterfly Blush Designs.  You can visit her blog here.
Thank you Nette for a really beautiful kit.

This tutorial was written assuming you have a working knowledge of PSP.

~~ Lets get started ~~

Open up the template.
Shift + D.
Close out the original.
Image/Canvas Size:
700 x 550
OK
Delete the top 8 layers and Pixel Words layer.

From the Elements 2 folder:
Copy and paste SG Ribbon as a new layer.
Resize 40%
Free rotate Left 75 degrees
Move into position over Thin Black Rectangle template layer.  It won’t be long enough to cover the whole template so duplicate the element and move to cover the lower area of the template.
Delete the template layer.

Paste the ribbon again.
Resize 40%
Free rotate Left 90 degrees
Repeat the above step accept this time position over Thin Pink Rectangle template layer.

Highlight Pink Rectangle layer.
Click on it with your Magic Wand.
New Raster layer.
Copy and paste Paper 8 Into Selection.
Deselect
Delete the template layer.

Highlight Glitter Oval layer.
Click anywhere outside of it with your Magic Wand.
New Raster layer.
Flood fill with #482817
Adjust/Add Remove Noise/Add Noise:
Gaussian and Monochrome checked
Noise: 40%
OK
Deselect.
Delete the template layer.

Highlight Glitter Circle layer.
Repeat the above step.

Highlight Oval layer.
Click anywhere outside of it with your Magic Wand.
New Raster layer.
Copy and paste Paper 5 Into Selection.
Deselect.
Delete the template layer.

Highlight Green Circle layer.
Click anywhere outside of it with your Magic Wand.
Copy and paste Paper 8 as a new layer.
Resize 75%
Move into position so just the sky area of the paper is within the circle.
Tap the delete key.
Deselect for now.

We’re going to add the elements and tube within the circle – see my tag for reference of placement.  Don’t worry about what overhangs the circle.  We’ll clean that up in a bit.

Make your tube image active.
Using your Freehand Selection tool outline the water area:

Edit/Copy
Make your working canvas active.
Paste as a new layer and position over the bottom of the.
Copy and paste your tube as a new layer over the water.
From the Elements Folder, copy and paste SG Clouds as a new layer just over the circle paper layer.
Move it up slightly so that it covers all of the sky area.
Change the Properties to Overlay.
Duplicate/Change the Properties to Burn
Copy and paste your tube as a new layer just over the cloud layer.
Change the Properties to Soft Light.
From the Elements Folder Copy and paste SG Treehouse as a new layer.
Resize 40%
From the Element 2 Folder Copy and paste sg Whitish Sparkles as a new layer.
Resize 30%

Highlight the circle paper layer.
Click anywhere outside of it with our Magic Wand.
Highlight each element that overhangs the circle layer (accept for the sparkles layer) and tap the delete key.
Deselect.

From Elements 2 folder copy and paste SG Vine as a new layer.
Resize 50%
Duplicate/Move it down a little to match the vine up so that you create what looks like a longer vine – see my tag for reference.
Erase the part of the vine that overlaps the other.
Merge Visible both vine layers.

Add your elements.  I used:
From the Elements folder:
Fan:  Resize 50%/Duplicate/Flip
Butterfly:  Resize 15% and 80%/Free rotate Right 15 degrees
Blue Bird:  Resize 10%/Duplicate/Mirror
From Elements 2 Folder:
Sparkles

Highlight your white canvas.
New Raster layer.
Select All.
Copy and paste Paper 2 Into Selection.
Deselect.
Apply the mask.
Merge Group.
Use your Target Tool and change the color to #7dbfd8

Add your credits.

Add your name.
Foreground: #080c04
Background: #7dbfd8
Stroke width: 1.00
Type your name.
Give it a slight Inner bevel:

I’m going to try to make this as easy as I can for you to follow if you’ve never used the Sqirlz Water Reflections before.  It’s really quite easy.

In your layers pallet Right Click (on any layer)/View/None.
Starting at the bottom with your white canvas, open up every layer all the way up to and including the tube layer.
You want to save this as a jpeg.  Name it “For water Animation”

Open up the Sqirlz Water Reflections program.
File/Open/Look for the jpeg you just saved.
Click on the red circle on the right side of the program:

Carefully outline the water area on your image:

Click on the blue ripple icon (Customize Basic Ripples):

Match your settings to mine and then click on the red x to close the box out:

Click on the yellow arrow icon to view your animation:

After you’ve viewed your animation then click on the red gif button:

Click on the gif button again.
A small box will appear.  Click OK
A box will appear for you to name your animation – “Your World”
Click OK.
Click OK.
And let the program save your animation.
A box will appear to let you know it’s been saved.
Click OK.
Close your image out.
Close the program out.

Open up Animation Shop.
Open up the animation you just saved.
Ctrl + A to highlight all layers.
Click on the Propagation Paste icon at the top – it looks like 3 papers with the corners folded over.

Back in PSP.
Start at the very bottom in your layers pallet and click on each eye of every single layer all the way to the top  - you’re closing out the opened layers and opening up the closed layers.
Edit/Copy Merge

Back in AS.
Ctrl + E and move the elements into position over the animated image.  Once it’s positioned click your mouse.

View your animation.
If you’re happy then save.

Resize all layers 80%

I’d love to see your results.
Email me!
Hugs,
Bev